MK Series Premium Free Standing Drinking Fountain - 35L/h Cooling Capacity

Designed for high-usage environments, the MK Series is a premium, heavy-duty free-standing drinking fountain, ideal for gyms, schools, workplaces, public spaces, sports facilities, and public areas. Engineered for durability and performance, it delivers a reliable supply of chilled water, even in the most demanding conditions.

With a cooling capacity of 35 litres per hour and an extra large 8-litre storage tank, the MK Series ensures a steady flow of cold water, making it perfect for busy areas. The
heavy-duty, auto-return tap is built for longevity, while the soft-finish bubbler provides a comfortable and hygienic drinking experience. Available in either a grey powder coat
or stainless steel finish, this unit seamlessly integrates into a variety of environments. Fully WaterMark compliant and backed by a two-year warranty, the MK Series offers peace of mind with robust construction and industry-leading reliability.

• 35L/h chilling capacity – suitable for 86 servings of 500ml water per hour
• Extra Large 8L insulated water storage tank Industrial grade stainless-steel tank with robust construction.
• Auto return heavy duty glass filler tap
• Polished stainless-steel top.
• Front panel removes for ease of servicing.
• Adjustable, tamper proof non-squirt water bubbler and drink bottle/glass filler.
• Robust compressor and refrigeration system
• Australian WaterMark Certification (Lic No. WMK26317)
• Optional filtration kit

The MK Series is designed with an easily removable front panel that gives instant access to all components and controls. Hassle-free filter changes and services can be undertaken without disconnecting the plumbing.

Available in filtered or unfiltered configurations with a stainless steel or grey powder coat finish.

We recommend using a licensed plumber to install this unit.

Purchased a filtered version and time to change the filter?
💧 Find replacement filters here. 

Unpack

1. After unpacking the water fountain, wipe with a soft cloth. Check the unit for evidence of rough handling.
2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat, otherwise performance may be affected.

Install

The installation must be in accordance with AS/NZS 3500.1 and AS/NZS 3500.2. Pipe jointing is a trade skill and Aqua Cooler recommends this process is performed by qualified personnel only.

1. Ensure proper ventilation by allowing 75 mm clearance on each side of the fountain.
2. Minimum water pressure is 100 kPa and maximum is 700 kPa.
3. The recommended maximum water inlet temperature is 38°C.
4. Install a 40 mm waste trap onto the waste outlet on the rear of the fountain - not supplied.
5. Water in connection is secured via a 1/2” kinko nut and olive into the stainless-steel connection on the rear of the unit. It is recommended that a 1/2” shut off valve is installed at this point for ease of future maintenance.
6. Turn on water supply and hold down bubbler to purge the system of air until a steady stream of water comes from the tap.
7. For models equipped with a glass filler, please remove the white tubing from the hole and then assemble the glass filler by placing the neck into the hole on the top of the lid, as shown below.
8. The bubbler needs to be adjusted for the correct water flow in relation to the local water pressure. On the side of the bubbler is an inner and an outer screw. Once you have established water flow, adjust the inner screw until the stream is in the centre of the stainless-steel top.
9. Check all connections for water leaks.
10. Flush fresh mains water through the unit for five minutes to ensure any residual water from testing is cleared.
11. Plug the fountain into the building electrical supply. The unit will start automatically.

Enjoy