Curve Instant Hot & Cold Water Dispenser

Enjoy water any way you like with this beautifully designed Curve Countertop Instant Hot & Cold-Water Dispenser.

This easy-to-use system features three pre-set temperatures for great tasting hot, ambient and chilled water – fast! Making a warming cup of tea or keeping refreshed and hydrated on hot days has never been simpler, and the ambient water option give you the flexibility to dispense room-temperature filtered water perfect for drinking, cooking or other small applications.

Fitted with a UVC LED filtration system, means you’ll always have fresh, filtered water at hand. Paired with water shortage smart reminders, offering boil-dry protection and notifications to refill your tank means you can continue enjoying the Curve system.

💧 Find replacement filters here. 

Key Features

• Conveniently sized to fit on your benchtop
• Easy to refill
• Three pre-set temperature settings (Hot, Ambient & Cold)
• Three pre-set cup volume sizes (100, 150 & 250mL)
• Built-in cooling system, with outlet temperature at approx 12-16°C
• UVC LED Filtration for healthy drinking water
• Child lock protection and low water level indicator

With no plumbing required, the sleek and compact Curve Countertop system is ready to plug in and use on your kitchen benchtop or in your home office. The convenient 3.5L water tank is easy to fill, making it a great choice for those who can no longer lift heavy water bottles/kettles.

Unpack

1. After unpacking the water cooler, wipe with a soft cloth.
2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to direct sunlight or other sources of heat.
3. It is best to place the water cooler in an area with good air circulation. Make sure there is at least 10 cm of space between the back of your cooler and the wall. Keep a minimum distance of 5 cm on each side of your water cooler.

Install

1. Make sure the water dispenser is not plugged into an electrical outlet.
2. Remove the bottle support by twisting in the direction specified to access tank
3. Flush tank with water and wipe with soft cloth
4. Insert the water bottle vertically on the bottle support/spike of the water dispenser.
5. Wait until the tanks fill with water. Press the cold water tap down until water begins to flow. Press the hot water tap (if applicable) down until water begins to flow.
6. Flush through 5L of water to ensure lines are cleaned. More may be required if taste is strange. Once flushed, ensure the cooler tanks are full of water before moving to step 7.
7. Insert the power plug into an electrical outlet.
8. Turn the electric switches to ON position to start the appliance. DO NOT MOVE BOTH SWITCHES AT THE SAME TIME. ENSURE STEP THREE IS COMPLETED FIRST
9. Indicator lights on front should light up. The appliance is designed to provide water whenever you need it. It will automatically turn on and off when the water reaches the desired temperatures. The indicator lights will not show all the time.
10. When heating light turns off, the heating tank is at temperature. Make sure to drain the hot tank through the tap after the first heating cycle and dispose of water.

Enjoy