Prefilter PP5 Micron (Stage 1 Replacement Filter for Purity Series)

Replacement Prefilter PP5 Micron (FT-82). This 5 micron polypropylene sediment filter removes particles suspended in inlet water.

It is recommended to replace this filter every 12 months maximum.

4 Stage Filtration & Booster Pump:

• Stage 1: Prefilter PP5 Micron - This stage removes particles suspended in inlet water.
• Stage 2: Prefilter Carbon - Removes free chlorine, odour, organic contaminants, pesticides and chemicals that contribute to undesirable taste and odour.
• Stage 3: 75GPD RO Membrane - This is the heart of the Purity Series, and removes contaminants down to a molecular level.
• Stage 4: Post Filter Carbon - Removes any remaining odours and tastes.

💧 Suitable for use in our Purity Reverse Osmosis Countertop Water Purifier. Learn more here

The change the prefilters proceed as follows;

1. Unscrew the two screws on the back of purifier.
2. Remove the back cover.
3. Identify the filter to be changed. Rotate clockwise.
4. Once unscrewed, remove from purifier.
5. Remove new filter from packaging and insert into purifier by gently pushing upwards while rotating counterclockwise until seated in place.
6. Replace back cover.

When to change your filters

It is important to change these filters before they are exhausted. It is recommended to replace the filter every 12 months at a maximum.