Replacement Filter for Tri Stage Refillable Filtered Bottle. The filter contains five stages; activated carbon, mineral stone, silicon, mineral ball and ceramic disk.

Stage 1) Activated Carbon
Absorbs selective substances to deodorize, disinfect and decontaminate. Removes toxins such as hydroxybenzene, Mercury, Lead, Arsenic and Chloride.

Stage 2) Mineral Stone
Improves overall quality of water. Mineral Stone absorbs Magnesium, Iron, Manganese and adjusts the PH value of the water. It also increases the quantity of oxygen found in the water.

Stage 3) Silicon
Removes unnecessary iron and manganese.

Stage 4) Mineral Ball
Contains a large quantity of natural minerals. These minerals release more than 20 beneficial micro-elements such as Zinc, Lithium, Iodin, Selenium into the water.

Stage 5) Ceramic Disk
Filters most impurities from the water with strong absorption abilities and prevents any filter agents from entering the water.

It is recommended to replace your filter every 3 months.

Instructions

Operation Guide

Remove the cover of the outer container
Place the filters in cold water and let them soak for approximately 30 minutes.
Wash the outer container and inner bucket sections with soap and cold water before first use, and regularly thereafter.
Assemble the filter cups tightly on the inner bucket and then fit them back into the outer container. *Gaskets must rest securely around the filters to avoid leakage.
Place the ceramic disk and cloth covering the inner bucket and screw on the disc cover.
Place the inner bucket into the outer container.
Fill the inner bucket completely with water and wait until the filtered water has collected in the outer bucket. Empty the outer bucket and repeat this step again. Upon filling the inner bucket for the third time replace the lid and enjoy a glass of freshly filtered water.

When to change your filters

It is important to change these filters before they are exhausted. It is recommended to replace your filter every 3 months. These filters are certified for 2,700L).

Cleaning Your Water Filtration System

The outside of the water filtration system can be wiped with a damp cloth at any time. When the Multi-level filter is being replaced you should rinse out the inner and outer buckets. Please note these parts are not dishwasher safe.

Being away for extended periods of time

When not using the water filter system for more than a week or going on vacation it is recommended that you always drain out any residual water before use again. Never empty the outer bucket before going away as the filter will dry out.

Useful Tips & Precautions

Never filter hot water or use it to clean your filters
Never remove the water filtration system to fill at the sink. Always use a pitcher to fill the system.
This unit is not dishwasher safe.
Water filtering speed can become a little slow when the quantity of water in the outer bucket increases. Dirty ceramic disks may also cause a decrease in speed.
Keep your unit in the dry place and out of direct sunlight.
Please make sure to clean the inner bucket regularly to avoid dirt and calcium build-up.

Other Accessories