Oasis Plumbed Water Cooler – Ambient & Cold
- In stock, ready to ship
- Inventory on the way
Conveniently Plumbed-In Oasis Cooler System
This stylish, stainless-steel sided Oasis Plumbed Water Cooler offers convenient ambient and cold water. This an ideal addition to your modern kitchen, living area or home office. A high-performing system, with durable refrigeration the Oasis Series is great home water cooler choice.
Convenient mains connection via ¼” push fit female fitting and includes connection kit to connect to a ½” tap. Internal self-filling mechanism keeps the 4L internal water tank topped up automatically. Oasis has a 2L/h chilling capacity.
This free-standing unit serves both ambient and cold water, with self-closing taps. An optional external filter kit is also available to be added.
Key Features
- 2L/h cold water chilling capacity (Cold water chills to approx. 5°C)
- 4L water storage tank
- Heavy-duty stainless steel side panels
- Durable, self-closing taps
- Stainless steel housing
- Easy-to-clean, removable drip tray
- 12 months standard warranty and 36 months refrigeration circuit warranty.
The stainless-steel body makes the Oasis range suitable for heavy-duty applications such as keep staff hydrated in small workshops. These units can dispense 2 L/h cold water and comes with our standard twelve-month warranty and additional twenty-four-month refrigeration circuit warranty.
Purchased a filtered version and time to change the filter?💧 Find replacement filters here.
WATER RESERVOIR | Cold: 4L |
HOUSING MATERIAL | Plastic with Stainless Steel |
REFRIGERATION | Uses R134a refrigerant |
WATER CONNECTIONS | ¼” quick-connect tube fitting |
THERMOSTAT CONTROL | The thermostat is factory set |
CAPACITY | 2L/h Cold |
POWER CONSUMPTION | 85 W |
ELECTRICAL | 220-240 V, 50/60 Hz |
WEIGHT (PACKED) | 14 kg |
DIMENSIONS (PACKED) | 1010 x 350 x 350 mm (HxWxD) |
WARRANTY | 12-month comprehensive coverage, additional 24-month compressor replacement. |
Unpack
- After unpacking the water cooler, wipe with a soft cloth. Check the unit for evidence of rough handling.
- Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to sources of heat otherwise performance may be affected.
Install
The installation must be in accordance with AS/NZS 3500.1 and AS/NZS 3500.2, as well as the instructions below. The unit is supplied with an Installation kit for connection to the mains water supply. This kit includes a) Dual Check Pressure Limiting Valve b) 1/2” female BSP to 1/4” Speed fit adapter, 1 metres of 1/4” tube, and red locking clips.
- Ensure proper ventilation be allowing 75 mm clearance on each side of the cooler.
- Minimum water pressure is 100 kPa and maximum is 700 kPa.
- A pressure limiting valve is included inside the packaging and acts as the “end connection device”. The pressure limiting valve needs to be installed between the mains supply water and the rear water inlet of the water cooler.
- The recommended maximum water inlet temperature is 38°C. Cooling performance may be affected in high ambient conditions or high-water inlet temperatures.
- Connect ¼” tubing from mains connection fitting (supplied) to the included pressure limiting valve inlet. Then connect another length of 1/4 “tube from the outlet of the pressure limiting valve to the water inlet fitting on the rear of the water cooler. If supplied with filter kit, put filter inline between outlet of pressure limiting valve and inlet of cooler.
- Turn on water supply and let tank fill with water for approximately 2 minutes.
- Hold down taps until steady stream of water appears.
- Check all connections from mains supply through to the rear of the cooler for water leaks.
- Flush fresh mains water through unit for five minutes to ensure no leaks.
- Plug the cooler into the building electrical supply and for the cook and cold model: Switch the cold-water switch to the ON position.
Enjoy
- Chills up to 2L water per hour.
SKU's
- Without Filter Kit: AC-OMCC
- With Filter Kit: AC-OMCCF