Tri-Stage Replacement Filter

This Tri-Stage Replacement Filter has five phases of filtration; activated carbon, mineral stone, silicon, mineral ball, and ceramic disk. These reduce sediment, removes chlorine taste and odour, produces great tasting, fresh filtered water. 

Stage 1) Activated Carbon - Absorbs selective substances to deodorize, disinfect and decontaminate. Removes toxins, chloride, improves the taste and odour of water.

Stage 2) Mineral Stone - Improves overall quality of water. Adjusts the PH value of the water. It also increases the quantity of oxygen found in the water.

Stage 3) Silicon - Removes unnecessary iron and manganese.

Stage 4) Mineral Ball - Contains a large quantity of natural minerals. These minerals release more than 20 beneficial micro-elements such as Zinc, Lithium, Iodin, Selenium into the water.

Stage 5) Ceramic Disk - Filters most impurities from the water with strong absorption abilities and prevents any filter agents from entering the water. (Note, this is different to the loose ceramic disk)

It is recommended to replace your filter every 3 months.

💧 Tri-Stage Filters are suitable for use in our Tri-Stage Refillable Water Cooler Bottle. Learn more here. Tri-Stage Refillable Water Cooler Bottles are included as part of our popular Eco Packages.

Key Features

• 5-phase filtration
• Reduces chlorine and sediment
• Improves taste and odour
• Improves the overall quality of the water.
• Produces Great tasting, fresh filtered water
• Easy to install

Operation Guide

1. Remove the cover of the outer container
2. Place the filters in cold water and let them soak for approximately 30 minutes.
3. Wash the outer container and inner bucket sections with soap and cold water before first use, and regularly thereafter.
4. Assemble the filter cups tightly on the inner bucket and then fit them back into the outer container. *Gaskets must rest securely around the filters to avoid leakage.
5. Place the ceramic disk in the inner bucket and screw on the disc cover.
6. Place the inner bucket into the outer container.
7. Fill the inner bucket completely with water and wait until the filtered water has collected in the outer bucket. Empty the outer bucket and repeat this step again. Upon filling the inner bucket for the third time replace the lid and enjoy a glass of freshly filtered water.

When to change your filters

It is important to change these filters before they are exhausted. It is recommended to replace your filter every 3 months. These filters are certified for 2,700L.

Cleaning Your Water Filtration System

The outside of the water filtration system can be wiped with a damp cloth at any time. When the Multi-level filter is being replaced you should rinse out the inner and outer buckets. Please note these parts are not dishwasher safe.

Being away for extended periods of time

When not using the water filter system for more than a week or going on vacation it is recommended that you always drain out any residual water before use again. Never empty the outer bucket before going away as the filter will dry out.

Useful Tips & Precautions

• Never filter hot water or use it to clean your filters
• Never remove the water filtration system to fill at the sink. Always use a pitcher to fill the system.
• This unit is not dishwasher safe.
• Water filtering speed can become a little slow when the quantity of water in the outer bucket increases. Dirty ceramic disks may also cause a decrease in speed.
• Keep your unit in the dry place and out of direct sunlight.
• Please make sure to clean the inner bucket regularly to avoid dirt and calcium build-up.