Cascade Eco TriTemp Water Cooler
Cascade TriTemp Water Cooler Dispenser with Bottle Under Unit
Cascade TriTemp Water cooler for office with Bottle Under Unit
Cascade TriTemp Water cooler for office with Bottle Under Unit

Cascade Eco Series | Premium Tri-Temp Dispensing Water Cooler with Integrated Refillable Bottle

Regular price$425.00
/
Tax included. Shipping calculated at checkout.

  • In stock, ready to ship
  • Inventory on the way

Stylishly presented hot, cold, and ambient water at the touch of a button.

Enjoy your water any way you need with the Cascade Eco Series Tri-Temp Water Cooler.

This easy-to-use system features three pre-set temperatures for great tasting hot, ambient, and chilled water. With a bottom loading compartment and included refillable bottle, you can have 10 litres of water always available without needing to look at large bottles mounted to the top of your water cooler.

With no plumbing required, but the great look of a mains-connected unit, you can use the refillable bottle included, or simply hook up pre-filled spring water bottles without the need to heavily lift them into place, making the Cascade Eco Series ideal office water coolers. 

Key Features

  • 5.1L/h cold water output (Cold water chills to approx. 5°C)
  • 7.9L/h hot water output
  • High impact polymer housing parts.
  • Bottom loaded bottle for easy installation.
  • Hot, cook and cold in a single unit.
  • Stainless steel reservoir and hot tank.
  • Easy-to-clean, dishwasher-safe drip tray.

Looking for the best water cooler in Australia? Whisper quiet in chilling and heating, with convenient light indicators when the pre-chilled or heated tanks are refilling or the bottle needs topping up, the Cascade Eco Series is an ideal choice in homes, offices and waiting areas.

💧  Find replacement filters here.


 ** Unit shown with spring water bottle installed - package includes 10L wide mouth reusable bottle

WATER RESERVOIR Cold: 3.3L | Hot: 1.1L
HOUSING MATERIALS High impact polymer top, base & front panels
REFRIGERATION Uses R134a refrigerant
THERMOSTAT CONTROL The thermostat is factory set
CAPACITY Cold: 5.1L/h | Hot: 7.9L/h
POWER CONSUMPTION 545 W
ELECTRICAL 220-240V, 50/60Hz
WEIGHT 16.5kg
DIMENSIONS (PACKED) 1040 x 310 x 330 mm (HxWxD)
WARRANTY  12-month comprehensive coverage. Three year compressor replacement. 

Please ensure you follow the full directions included in the printed user manual with the unit.

Unpack

  1. After unpacking the water cooler, wipe with a soft cloth.
  2. Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to direct sunlight or other sources of heat.
  3. It is best to place the water cooler in an area with good air circulation. Make sure there is at least 10cm of space between the back of your cooler and the wall. Keep a minimum distance of 5 cm on each side of your water cooler.

Install

  1. Make sure the water dispenser is not plugged into an electrical outlet.
  2. Open the door of the lower cabinet.
  3. Place full water bottle on floor. Remove the plastic cover over the mouth of the water bottle.
  4. Place the stainless tube inside the bottle and place the water bottle cap firmly over the mouth of the water bottle.
  5. Slide the siphon tube down until it reaches the bottom of the bottle. See page 5, “ADJUSTING THE SIPHON TUBE”.
  6. Slide the bottle inside the cabinet and close the lower cabinet door.
  7. Read all safety precautions in this manual and then plug the water cooler into a grounded power outlet.
  8. Before drinking, purge 2-3 litres of water from the cold and hot taps.
  9. If you are not going to use hot water, turn the hot tank switch to OFF to conserve energy.

Enjoy

  • For maximum efficiency and performance, your water dispenser requires cleaning on a regular basis (i.e., every 6 months). Regular cleaning will prevent potential growth of bacteria and will maintain a hygienic environment.

Learn how to set up your Cascade Eco Water Cooler

*Please ensure you allow water to enter the the tank of the unit before turning it on at the power point.


When to change your filters

It is important to change these filters before they are exhausted. It is recommended to replace the filter every 6 months. 

Cleaning Your Water Filtration System

The outside of the water filtration system can be wiped with a damp cloth at any time. When the carbon filter is being replaced you should rinse out the inner and outer buckets. Please note these parts are not dishwasher safe.

Learn how to maintain your Cascade Eco Water Cooler



This site is protected by reCAPTCHA and the Google Privacy Poli